Preparations, 4windos20(kw – Panasonic CF-VDD723 User Manual
Page 7
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Preparations
4WindoS20(Kw
Confirm that [Transfer Mode] is set to [DMA if available] in [Start] - [Settings] - [Control
Panel] - [System] - [Hardware] - [Device Manager] - [IDE ATA/ATAPI controllers] - [Sec
ondary IDE Channel] - [Advanced Settings] - [Device 0]. Perform this setting if it has not
yet been made.
mnmmpi
Confirm that [Transfer Mode] is set to [DMA if available] in [Start] - [Control Panel] -
[Performance and Maintenance] - [System] - [Hardware] - [Device Manager] - [IDE ATA/
ATAPI controllers] - [Secondary IDE Channel] - [Advanced Settings] - [Device 0]. Per
form this setting if it has not yet been made.
iWindow^SSI
Confirm the following contents in [Start] - [Settings] - [Control Panel] - [System] - [Device
Manager] - [CDROM] - [MATSHITA DVD-ROM SR-****] - [Settings]. Make the settings
if they have not yet been made.
* Add a check mark for [DMA].
• Set both [Start drive letter] and [End drive letter] in [Reserved drive letters] to [L:].
X
note
>
<Using PC Cards>
If the PC Card does not work, there may be no intenrupt request (IRQ) line available.
Deactivate unnecessary equipment using in the Setup Utility.
To play DVD-Video or MPEG2 files, install the DVD playback software (included).
For information on how to install the software, refer to the manual of the software.
The region code has been set to the following:
<For U.S.A. and Canada> Set to “1”
<For Europe>
Set to “2”
Use of another region code or alteration of the region code invalidates the warranty.
For more information, contact Panasonic Technical Support.
If commercially available DVD playback software asks you the region code, set to
the following;
<For U.S.A. and Canada> Set to “1”
<For Europe>
Set to “2”