Changingthe dust, Vw-s- ■. .ixls ^ v – Panasonic MC-V7347 User Manual
Page 15
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
CHANGINGTHE DUST
■vw-s- ■. .ixls
^
V <
Always operate the vacuum with a genuine Panasonic Type U3 Standard, or U6
Electrostatic dust bag installed. Panasonic dust bags may be ordered through any
authorized Panasonic dealer.
1. Pull outward on
the dust cover grip,
located on the top of
the dust cover and
remove the cover.
2. To remove the dust
bag, grasp the cardboard
portion of the dust bag
and pull it out.
3. Spread out the end
of the new dust bag.
NOTE:
Pull carefully so
as not to tear the bag at
the folds.
CD
□ o
4.
Fold the new dust bag to
clear the slots as shown in
illustration. Failure to do
so will prevent the dust
cover from closing
properly. Attach the
new dust bag onto
the bag holder by
holding the card
board portion and
pushing back as
illustrated.
5. Reinsert the tab pro
vided on the end of the
dust cover into the
grooves on the dust com
partment to allow the
cover to rotate closed.
NOTE: The dust
cover must be com
pletely and cor
rectly installed for
proper opera
tion.
6. Rotate the dust cover up
into the closed position and
press into place.
NOTE:
The dust bag
should not be
caught
between
the lower edge
of the dust
cover and the
gasket as indicated
by the arrow in the
illustration.
-
15
-