Panasonic KVS2055L - Manual (Page 12)

Display Panel Instructions
■Setting the scanner
Tine following parameters can be customized using thè scanner's various setting modes. If the application
software provides these features, it will be supported by the scanner.
Scan menu
Item Contents
Front side brightness Selection for density when scanning the front side of a document.
Front side image emphasis Selection for emphasis when scanning the front side of a document.
Front side contrast Selection for contrast when scanning the front side of a document.
Front side halftone Selection for gradation when scanning the front side of a document.
Back side brightness Selection for density when scanning the back side of a document.
Back side image emphasis Selection for emphasis when scanning the back side of a document.
Back side contrast Selection for contrast when scanning the back side of a document.
Back side halftone Selection for gradation when scanning the back side of a document.
Noise reduction Selection for noise reduction when scanning a document.
Double feed detection Selection to choose to detect double feeding function.
Feed speed Selection for feed speed when a document is being scanned.
Black line removal
Selection to choose to remove the black lines which appear at the top
and bottom of the image after scanning the document.
Scanning mode
Selects whether documents are scanned at actual size or reduced (Fit to
Page) size.
Scanning settings
(Select memory)
Selects the memory where the conditions are saved into.
Save scanning settings
(Execution)
Saves the scanning conditions into the memory. (2 memory settings)
Load scanning setting
Loads the memory where the scanning conditions have already been
saved. If "Default" is selected, all of the scanning conditions will return
to the default values.
Counter menu
Item Contents
Select the counter displayed
on the LCD
Selection to choose to display the cleared counter (scan counter) after
scanning one time or to display the user set counter (user counter) on
the LCD.
Setting the user counter Selection for default number before scanning.
Setting the user counter
extender
Selection for an increase in the default number.
Clear the user counter Clears the counter which was set by the user.
1 2