Cleaning the unit – Panasonic KVS2055L User Manual
Page 33
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Cleaning the Unit
3
Clean the scanning section glass
and white sensor rollers using the
accessory roller cleaning paper.
Then remove the dirt on the
document sensors and double
feed detection sensors with the
included blower.
•
When
cleaning
the
bottom
scanning
section
glass,
do
not
touch
the
tip
of
the
plastic
pointer
(black)
in
the
back
of the unit.
If the paper path selector is set to the
lower side, it may cause an injury.
•
If
the
white
sensor
roller
is
removed
while
cleaning,
re-attach
it
after
cleaning.
(Refer
to
page
34
for
re-attachment.)
Document sensors Double feed detection sensors
Document sensor
Scanning section glass
Document sensors
Document sensor
Document sensor
Left side view
• How to clean the document sensor or
double feed detection sensor
Remove the brush and blow
off the dirt through the
document sensor hole or
double feed detection
sensor hole.
Document sensor or double
feed detection sensor
4
Close the front door; (See the
diagram in step 4 on page 32.)
• Push both sides of the front door
down slowly until it clicks into place.
33