Panasonic TX-29F155A - Manual (Page 20)

(Tuning menu)
Auto tuning (Via Remote controi)
Before Auto tuning, set the “Sys select” and “Ch select” mode.
© ® o n
^ suKuo ma
Q ®
B-TUW N o fl o
1
Press
2
Move to choose Setup menu option by using Q or Q.
3
Access Setup menu mode by using p | or r~T|.
4
Move to choose Tuning menu option by using Q or Q,
5 Access Tuning menu by using p~) or (~T1.
AUTO SETUP IN PROGRESS
SEARCNING :P[.£ASE WAIT
6
Move to choose Auto tuning by Q or Q.
7 Access Auto tuning by using or Q+].
Once this operation is compieted, the TV will display the programme now
stored on programme position
1 .
8 Press Q at any time to go back to watching TV.
OR
Press the
o
button three times.
Auto tuning (Via front panel)
It is also possible to use the control panel buttons on the front of the TV to tune individual programme positions.
1 Press
o
UEHU
(front panel) setting to Main Menu mode.
2 Press □
V
or O to select Setup menu in Main Menu.
A
3
Press O or O to access Setup menu.
4
Press
o
V
or O to select Tuning menu.
5
Press
o
or O to access Tuning menu mode.
6 Press □ or O to select Auto tuning.
A
7
Press
o
or O to start search.
-E
8
Press O button 3 times to exit the Tuning menu.
VENU
OR
Press O at any time to go back to watching TV.
Helpful Hint
1. If a clear picture with correct colours cannot be obtained when a Broadcast or AV signal is received, refer to
the “Colour System Selection” operation on page 17.
2. After the Auto tuning is finished, press the Programme Number “Up” txjtton to confirm the tuning condition for
each Programme Number, If some Programme Numbers are unused, it is possible to skip such Programme
Numbers. Please refer to the Programme Skip function on page 17.
20