Panasonic EB-G500 - Manual (Page 20)

Function Operation
Function Operation
To display the function menu press O.
To select a function press the associated function number.
To leave the function menu press B and hold.
If a menu option is not available the function number is displayed as an “X" and
cannot be selected. This may be because the telephone is not in a service area, it is
being used in a mode that does not support that feature (hand-held/car mount) or the
SIM being used does not support that feature.
The current setting may be shown with an in front of the option.
Call Meter
(■ Call meter
4 (■ Last call meter
® I 9 Accumulated call meter
S) I €B Price per unit
V GB Call limit
If you are given call charge information by your service provider the remaining
charge units, during a call, and the call cost, when the call has ended, will be
displayed. Call times are indicated as:
hours (0-99), minutes (0-59), seconds (0-59) — HH:MM:SS.
When the SIM is changed any call meter information will be lost.
NOTE: Call charge information may not give an accurate reflection of the tariffs
charged by the service provider.
Current/Last Call MS SB SB
The duration of the last call during standby and the current call during
conversation.
To see call charge information press (Y) or
( a ).
All Calls BB SB @
The accumulated duration of all calls. Incoming calls are shown with and
outgoing calls are shown with
To see call charge information press (S or ®. To reset the meter press CsEi, then
select which timer to reset by pressing ® or ®, followed by CsEi. To reset the
timers enter the lock code, or to reset the call charge enter the PIN2 and press
GHD.
16