Compaq MP1600 - Manual (Page 29)

MP1600 Microportable Projector 1-23
Writer: M. Silvetti Saved by: Marianne Silvetti Saved date: 11/08/99 5:08 PM
Part Number:383706-001 File name: BkCh1.doc
8. To exit from the on-screen menu, select Exit from the Main
menu. If the display is a second or third-level menu, select
Save and Return or Cancel, then select Exit from the Main
menu.
The on-screen menu is easy to use; just follow the instructions on
the screen.
Explaining Functions in the On-Screen Menu
■ Brightness and Contrast—Adjusts the displayed image
brightness and contrast ranges from 0 to 100.
✎
An example of a standard setting is to set the contrast level to
67 and the brightness level to 50.
■ Position—Fine-tunes the horizontal and vertical positions of
the display.
■ Zoom—Magnifies an image up to a factor of 32 on the
projection screen (zooms in to a specific area on the screen,
and pans left, right, up, and down).
■ Keystone—Adjusts image distortion at the top and bottom
widths of the screen caused by tilting the projector.
■ Picture—Adjusts the gamma value or degree of contrast of
darkness or light for the projected image.
■ Color—Adjusts color balance to compensate for ambient
conditions using three submenus:
❏ 7100
°
K—The factory default.
❏ Custom Color—Modifies the color temperature balance.
❏ Saturation—Magnifies the color intensity.