Compaq MP1600 - Manual (Page 31)

MP1600 Microportable Projector 1-25
Writer: M. Silvetti Saved by: Marianne Silvetti Saved date: 11/08/99 5:08 PM
Part Number:383706-001 File name: BkCh1.doc
Special On-Screen Messages
Special on-screen messages will appear on the projection display
to identify the following conditions:
■ Check Video Cable: Indicates the video cable may not be
plugged into the projector or the selected video input is not
accurate.
■ Input Signal Out of Range—Indicates the projector is
unable to access the appropriate input signal.
■ 2 Inputs Active - Remove One—The projector has two data
inputs: one is an analog D-Sub input and the other is a digital
DFP input. This message indicates that both inputs are active
simultaneously and the user should detach one of them.
■ Going to Standby—Indicates the projector is entering a sleep
mode or is powering off the lamp.
■ Lamp May Fail Soon, Replacement Suggested—Indicates
the lamp is approaching failure. The message will remain on
the screen for five seconds or until the on-screen menu Select
button is pressed.