Panasonic MC-V6970 - Manual (Page 10)

OPERATION - As you vacuum, the red
indicator light will come on and stay on as
long as the sensor detects a high
concentration of particles passing through
the cleaner.
The green light indicates that most of the
cleaning is complete.
The sensor switch allows you to select the
sensitivity of the dirt sensor. The switch can
be set to Hi or Lo sensitivity.
Set the sensor switch to the Hi position when;
• Cleaning bare floors.
« Cleaning carpet with low pile height.
Set the sensor switch to the Lo position when;
• Cleaning heavily soiled areas.
• Cleaning carpet with deep pile.
• Cleaning new carpets.
Sensor
SenshMty
Swftc/}
Even with the sensor switch in the Lo position, the dirt sensor will detect carpet fuzz, especially
on new carpet, which may cause the red light to remain on longer than expected.
HANDLE ADJUSTMENTS
The handle may be lowered
to any position required. Just
step on the area, as indicated
by the illustration, and
lower the handle as
desired.
1. Upright position
The handle locks in this
position for storage.
The handle should
always be in an
upright position when
the cleaning tools
are used.
2. Middle position
This position is for
normal cleaning.
3. Low position
This position
is used for
cleaning
under
furniture.
-
10
-