Panasonic MC-V6970 User Manual
Page 18
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
The hose located on the back of the vacuum cleaner carries the drt from the nozzle
up to the dust bag. If the hose should becorr« clogged:
1. Pull down on the suction inlet cover
and check for clogging in this area.
2. Disconnect the hose from the nozzle
and chedt the hose for clogging.
Plug in the vacuum deaner and turn it on.
While rurrdng the vacuum cleaner virith
the hose disconnected, stretch the hose
in and out to remove the dog.
If the dog stni exists, turn the vacuum deaner
"OFP and unplug the power cord. Turn the
vacuum deaner over, exposing the inderside.
Remove the lower plate. Remove the short
nozzle pipe from Ihe nozzle by Sfling it
straight up. Inspect the hose end and nozzle
pipe arxf dear them of any obstojctions.
Reinstall the nozzle pipe, lower plate and
nozzle hose. See the Removing/lnstailing the
Lower Plata section for detailed instructions.
Cover
(Suction
Inlet)
-
18
-