Unpack your ir remote control, Replace the battery, Things you should know – Panasonic PALMCODER PV-DRC9 User Manual
Page 2
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Things You Should Know
Thank you for choosing Panasonic!
You have purchased one of the most
sophisticated and reliable products on the
market today. Used properly, we’re sure it
will bring you and your family years of
enjoyment. Please take time to fill in the
information at right. The serial number of
this product may be found on the surface
of the unit. Be sure to retain this manual
as your convenient IR Remote Control
information source.
Date of Purchase
Dealer Purchased From
Dealer Address
Dealer Phone No.
Model No.
Serial No.
Unpack your IR Remote Control
1 pc. IR Remote Control (VSQW0044) with Battery (CR2025)
The battery has already been inserted into the IR Remote Control.
Replace the Battery
1
Insert a slender, pointed object, such as the tip of a ball
point pen into the slot so that it fits into the hole (as shown
in diagram a). Then, while sliding to the right, pull the
battery holder out with your fingernail.
Insert the battery into the Battery Tray with the G mark
facing up.
Do not reverse the polarity.
Replace the Battery Tray.
Replace battery with Panasonic PART NO. VSBW0004
(CR2025) only. Use of another battery may present a risk
of fire or explosion.
Caution-battery may explode if mistreated. Dispose of
used battery promptly. Keep away from children. Do not
recharge, disassemble or dispose of in fire.