Special effect features during playback, Frame by frame advance, Slow motion playback – Panasonic PALMCODER PV-DRC9 User Manual
Page 4: Index forward/reverse search, Ir remote control
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
IR Remote Control
Special Effect Features
During Playback
(Sound is muted during all special effects)
REVERSE
SLOW
FRAME
ADVANCE
INDEX
SEARCH
(rewind)
PLAY
FORWARD
SLOW
FRAME
ADVANCE
INDEX
SEARCH
(fast
forward)
Frame by Frame Advance
Press PAUSE during playback.
Press !► SLOW/F.ADV to do a frame by
frame advance.
Press ◄I SLOW/F.ADV to do a frame by
frame reverse.
Press PLAY to release.
Note:
• If you hold down SLOW/F.ADV, you can
see a continuous series of still images at
a slower speed than normal slow mode.
• During frame by frame advance, a few
frames may move automatically, and the
picture may become bluish for an instant.
Top Scan
If you hold down the INDEX SEARCH
button more than 2 seconds, the
Palmcorder will scan for scenes (or photo
shots) and playback the first few seconds
of each.
To cancel this function, press PLAY or
STOP.
Slow Motion Playback
Forward Slow = Press SLOW/F.ADV
during play.
Reverse Slow = Press SLOW/F.ADV
during play.
Press PLAY to release. (During reverse
slow motion playback, time code indication
may not change regularly.)
Note:
• Palmcorder will automatically STOP when
in slow motion for more than 10 minutes.
• During slow motion playback, picture may
move up and down. This is normal.
• When you start or stop slow motion
playback, the picture may become bluish
for an instant.
Index Forward/Reverse Search
Search for a particular scene by using the
electronic index marks placed at the
beginning of each recording.
1 Place the Palmcorder in the VCR STOP
mode.
2 Press the INDEX SEARCH fast forward
or rewind Buttons the number of
recordings (indexes) forward or back you
want to view. The Palmcorder will
advance or rewind to the desired
recording and automatically PLAY.
• The number of times you press the button
is displayed in the EVF and the LCD
monitor if you set INDEX on the VCR
menu to SCENE.
(Ex., if you press the button three times,
“S3” will appear.)
• If the interval between scenes is less than
1 minute, index search may not operate
properly.
• Response time between pressing the
button and change in the scene number is
quite slow. Do not press the INDEX
SEARCH Button rapidly and continuously.
• It won't playback when the tape reaches
the beginning during Reverse Index
Search mode.