Installation, Specifications – Panasonic RAMSA WS-A35 User Manual
Page 3
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
INSTALLATION
CAUTIONS
• For safest mounting and to avoid damage to the mounting treads, use Mounting Bracket W2-SA17 to mount onto the ceiling.
• Do not mount more than one speaker into one optional Ceiling Mounting Bracket.
<Horizontal lnsta!lation>
<Vertical instaiiation>
SPECIFICATIONS
Type :
Input Impedance :
Power Handling Capacity
Sound Pressure Level :
Frequency Response i
Crossover Frequency :
Speaker ;
Dispersion :
Dimensions :
Weight :
2-way, bass reflex type
8 ohms
140W (continuous program input)
70W (RMS)
90dB(1W/1m)
80 to 20,000 Hz
3,000 Hz
Woofer : 16 cm (8‘) cone speaker
Tweeter ; Cross-sectional Constant Directivity Spherical Waveguide
90 (horizontal) x 90 (Vertical)
15-3/16'X 9-1/16’x8-5/8‘
385 (W) x 230 (H) X 220 (D) mm
12.3lbs. (5.6kg)
Dimensions and weight indicated are approximate.
Specifications are subject to change with out notice.
True effective power measured by the test method prescribed by AMERICAN NATIONAL STANDARD EtA (Electronic Industries
Association) RS-426-A (1980).
In this test, a noise signal with an increased high frequency power component was used as a test signal to match the latest
program sources.
-3-