To enter the initial setup mode, Press i tear off, To exit the initiai setup mode press [ load/park – Panasonic KX-P3626 User Manual
Page 51
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
(yteflDO®®©(§®llCO^
Returning All Current Settings to the Factory Settings
This procedure will reset ALL settings to the original factory settings. This includes those settings made
through the Setup Disk.
Follow the instructions below:
If paper is loaded, you will automatically get a printout of the current settings.
^ To enter the Initial Setup mode
Whiie pressing ( LOAD/PARK ], turn the
power on, then reiease.
Make sure that FONT indicators and the Super Quiet
indicator are blinking.
Press i TEAR OFF ] .
All current settings will be reset to the Factory
settings, and a beep will sound.
^ To exit the initiai Setup mode
Press [ LOAD/PARK] .
If paper is installed, a printout will
verify the current setting.
■D
Q}
3
(D
51