Cx-dp600euc, Installation guide, Continued – Panasonic CQE15EUC User Manual
Page 26
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
• This unit can be connected to an optional CD changer {CX-DP600EUC or CX-DP1200EUC). For details
consult your nearest Panasonic dealers,
• For connection to a CD changer, refer to the operating instructions of the CD Changer (CX-DP600EUC or
CX-DP1200EUC).
• Fader Control does not affect the output of the amplifier connected to this unit’s preout cord.
Installation Guide
continued
Caution:
• To prevent damage to the unit, be sure to follow the connection diagram below.
• Be sure to connect the ground lead (black) to the car chassis first before connecting the other leads to the speci
fied wires of the car.
• Be sure to insulate any exposed wires from a possible short-circuit from the car chassis. Bundle all cables and
keep cable terminals free from touching any metal parts.
Extension Cord (DIN/BATT/RCA)
Insert the ground lead into
the notch of the chassis.
(Yellow)
—■::::::MBATTEnY|=|ZR^ht=’
Fuse (3A) Battery Cord
To a constant power supply
(White) (White)
CX-DP600EUC
<Back Side>
Ground lead
(To a clean, bare metallic
part of your vehicle.)
Be sure to connect to a well grounded metallic
part ot your car because noises or troubles
may occur.
White
iBtO] <
Gray
Gray
Red
Red /
Red
26
LEFT SPEAKER RIGHT SPEAKER
(FRONT)
(FRONT)
CQ-E15EUC
LEFT SPEAKER RIGHT SPEAKER
(REAR)
(REAR)