2] turning the display upward, 3] adjusting the viewing angle, Note – Panasonic CQVA70EU User Manual
Page 4: Adjusting the right-left angles (manual), Before drawing in the display, Basic operation (precautions)
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Basic Operation (Precautions)
(Continued)
[2] Turning the display upward
Non-slip portion
[3] Adjusting the viewing angle
Note:
• Do not turn the display forcibly.
• The display can be turned 135° in vertical direction
(upward and downward) and 20° to the right and left.
(The turning angles may be smaller for some car
models.)
• When adjusting the display angle, be careful not to
get your hands or fingers caught between the dis
play and the panel cutout.
• The display cannot be moved forward or backward
in the upright position. Never push or puli it forcibly.
Adjusting the right-left angles (manual)
Angle adjustment should be done slowly, without applying unreasonable force.
Before drawing in the display
Make sure to return the display to center position before drawing it in. It cannot be drawn in with its an
gles adjusted.
Note:
To move the display, always hold it by the upper half
(non-slip portion provided on the rear). If you hold the
lower portion, you could get your fingers caught be
tween the display unit and the mechanical parts at the
rear.
CQ-VA70EU