Panasonic CF-18 - Manual (Page 13)

X note >
When creating a new user account:
• If you make mail settings, create password reset disks ((^ page 14), or conduct
other related operations before creating the user account, you will be unable to use
any previous mail history or settings.
• When you create the first new account, you can only select [Computer administra­
tor].
Once a “Computer Administrator” account has been created, you can create addi­
tional limited user accounts.
Note also that only the added user account will be displayed in the Welcome screen.
The account for the administrator created during Windows setup will not be dis­
played.
If you use the wireless LAN, be sure to refer to the Reference Manual’s “Wireless
LAN”.
Create BACKUP Disks for Reinstallation
To create backup disks, the USB floppy disk drive (optional: CF-VFDU03) and format­
ted 2HD floppy disks are needed.
(T)
Connect the USB floppy disk drive to your computer.
NOTE^
The floppy disk drive must be the A drive.
Prepare 2HD floppy disks and make sure they arc
not in the write-protected state, and then set it.
©CKBSED
Seleet [Start] - [Programs] - [Panasonic] - [Create
Backup Disk] and follow the on-screen instruc­
tions.
tWindowsfXRi
Select [Start] - [All Programs] - [Panasonic] - [Cre­
ate Backup Disk] and follow the on-screen instruc­
tions.
( 4 ) Place a label identifying the contents on each disk.
face, and insert the
shutter-side headfirst.
Name of created backup disk
FIRSTAID FD (When the display for creating the UPDATE FD is shown, create
the disk by following the on-screen instructions.)
Store the floppy disks in a safe place. They will enable you to return your
computer to the condition at the time of purchase should any problems occur.
When creating backup disks, do not run any other application program.
When creating backup disks and the message [Insufficient files to copy] is
displayed, select [OK] and then contact Panasonic Technical Support.
While the floppy disk drive indicator is on, do not remove the floppy disk,
power off the computer or use the standby or hibernation function (C^
“Standby/Hibemation Functions”).
Be sure to create the backup disk.
If a backup disk is not created, it will be impossible to return the computer to
its original state. In this case, contact Panasonic Technical Support.
( This concludes the first-time use operation guidelines. )
13