Panasonic GP-RV201 User Manual
Page 10
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Advertising
3. Connect the Optional Camera Cable to the Camera 5, Install the Connector Cover into the chassis of the
Cable Connector (4).
Bracket.
4. Open the slit on the Connector Cover, and cover
the optional Camera Cable and Camera Cable
Connector.
Note:
Set the Connector Cover so that the slit is in
the up position.
6. Fix the Camera Unit into the Bracket using 4 Camera
Angle Adjusting Screws.
- 8 -
Advertising