Panasonic GP-RV201 User Manual
Page 9
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Advertising
5. Install the Connector Cover into the chassis of the
Bracket.
6. Adjust the camera to the desired angle and fix the
Camera Unit into the Bracket using 4 Camera Angle
Adjusting Screws,
I
Mounting the camera onto the top of the rear
panel of the vehicle.
1. Remove 4 Camera Angle Adjusting Screws and
remove the Camera Unit from the Bracket.
Remove 4 Angle
Adjusting Screws
2, Secure the Bracket on the top of the rear panel
of the vehicle by using 4 bolts (obtained locally (6
mm/diameter bolt)).
- 7 -
Advertising