A) using the rear support strap, B) using the rubber cushion (option), Installation procedures – Panasonic CQ-DPX152 User Manual
Page 25: Secure the rear of the unit, Battery terminal
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
□ Installation Procedures
First complete the electrical connections, and
then check them for correctness. page 28)
Insert mounting collar 0 Into the dashboard, and
bend the mounting tabs out with a screwdriver.
Make sure that the lock lever (
jk
) is flush with the
mounting collar ® (not projecting outward).
Lock lever
Lock lever (^
(D Power connector
Note:
oTo securely install the unit, fully bend a num
ber of the tabs so that there is no rattling,
o Be sure to fasten the unit securely when join
ing it with the mounting collar 0.
(a) Using the rear support strap
Fire wall of car
Secure the rear of the unit.
After fixing mounting bolt (D and power connector
©, fix the rear of the unit to the car body by either
method (a) or (b) shown below.
Insert trim plate 0.
After installation, re
connect the negative
0
battery terminal.
0 Tapping screw
(5 mm0x16 mm)
3 п\тф
0 Hex. nut
(5 mm0)
(3) Rear support
strap
® Mounting bolt
(5 mm0)
Mounting collar
(b) Using the rubber cushion (option)
Rear support bracket
Rubber cushion (option) (provided on the car)
0 Mounting bolt
(5 mm0)
0 Mounting collar
DBXfl52/DPd102U
25