General timetable for filter changes, Redlacement of the filter, General timetable for filter replacement – Panasonic F-P15HU2 User Manual

Page 9: Parts, Filter frame, Replacement of the filter, Care and maintenance

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

Care and maintenance

General timetable for filter changes

• When it is obvious that odor or cigarette smoke is not quickly removed or the operating sound becomes

louder than normal.

Note

The time of filter replacement may vary depending on condition of use.

• New filters may be purchased through your local dealer or parts distributor using the following part

numbers or call 1-800-332-5368 (PANASONIC SERVICE CENTER).

Model No.

F-P15HU2

F-P20HU1

HEPA filter

Part No. F-Y15XS

Part No. F-Y120XT

Deodorizing filter

Part No. F-Y55XS

Part No. F-Y520XT

ReDlacement of the filter

The HEPA filter and the deodorizing filter can be separately replaced.

■ General timetable for filter replacement

HEPA filter

»When the filter check lamp’s red light is on

(about 3 years after pressing the reset switch)

•Even when the lamp is on, operation will not stop.

Deodorizing filter

•When the filter check lamp’s red light is on

(about

1

year after pressing the reset switch)

•Even when the lamp is on, operation will not stop.

Filter

Check/Reset

HEPA Deodorize

0-0 o-

How to replace the filter: Read the replacement instructions, on the replacement

filter box.

After replacing any of the filters, plug in the power cord and reset the
corresponding reset switch, (refer to “before use”)

HEPA Filter replacement

^After replacement press the “HEPA” reset switch.

Deodorizing filter replacement

^After replacement press the “Deodorize” reset switch.

(A beep sound should be heard when each reset switch is pressed).

parts

№r{Red)

Filter frame

Wring out a soft cloth dampened with lukewarm water or a diluted neutral detergent for kitchen use.

Wipe any stains off with the cloth and rub dry with another cloth.

• Do not rub the label too hard. (It will come off.)
• Do not scrub the sealing material (black) on the filter frame.

(The sealing material will be damaged, resulting in loss of performance.)

Advertising
This manual is related to the following products: