Recording greeting messages, Suggested messages, For the 4afs/faxmode – Panasonic KX-F2710NZ User Manual

Page 13: 0 ■ for the ans/fax mode: press greeting select, How to record greeting messages

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

Installation and Preparation

Recording Greeting Messages

Record two types of greeting messages before using the unit as an answering device and a facsimile. One is

the message for the ANS/FAX mode, and the other is for the TEL/FAX mode.

The greeting message for the ANS/FAX mode tells a caller that you are unable to answer, and allows the
caller to leave a voice message or to send a fax message.

The greeting message for the TEL/FAX mode tells a caller that the unit is calling you up, and allows the
caller to wait until you answer the call or to send a fax message.

B

How to record greeting messages

Recording time is limited to 16 seconds for each message. Record a greeting message within 12 seconds

for optimum performance. Perform the following steps to record each of the messages.

Suggested messages

■ For the 4AfS/FAXmode:

“This is (your name, business and/or telephone

number). We are unable to answer right now. To

send a fax, start transmission. To leave a
message, speak (or 'speak for up to 1 minute’)
after the long beep. Thank you.’’.

m

For the TEL/FAX mode:

“This is (your name, business and/or telephone
number). Please wait for someone to answer the
line. To send a fax, start transmission. “

O Open the station key panel.

0 ■ For the ANS/FAX mode: Press

GREETING SELECT.

ANS-GREETING

For the TEL/FAX mode: Press GREETING
SELECT repeatedly until the following is
displayed.

TEL-GREETING

0 Press GREETING REC.

Example: Recording for the ANS/FAX mode

ANS REC 16s

—A beep will be heard.

0 Immediately after the beep, speak clearly and

loudly toward the microphone from a distance
of approximately 200 mm (8 inches).

0 When finished, press STOP.

—After a beep, the unit will play back the

message so that you can confirm it.

Adjust the speaker’s volume to a suitable
level by pressing the VOLUME buttons.

Notes:
• If you make a mistake while recording, repeat

from step 2.

• You can record the greeting message for the

ANS/FAX mode by directly pressing the

GREETING REC button without pressing the
GREETING SELECT button.

• To delete greeting message; after pressing the

GREETING REC button in step 3, immediately

press the GREETING REC button again or press

the STOP button.

13

Advertising
This manual is related to the following products: