Open the center speaker, Panel angle (tilt), Open/close the front panel – Panasonic CQDRX900U User Manual
Page 11: Display change
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Because the following oprations are not functioned with a remote control, use main unit buttons.
Open the
Center Speaker
Open; Press r/^1.
Close: Press again.
Note:
The center speaker can not be opened or closed
while the front panel is opened completely.
Panel Angle (Tilt)--------------------------
Press and hold
[OPEN]
(TILT) for more than 1 second
until signal sound is heard, then release.
Each time the button is pressed for 1 second and
release it, the panel angle is changed (in 3 steps).
Open/Close the Front Panel
• Press
[OPEN]
to open the front panel.
Note:
If nothing is changed for 20 seconds, the original panel
position will be recovered.
• To close the front panel completely, press
[OPEN]
again.
• To recover the original panel position, press
[OPEN]
again
and hold it for more than 1 second, then release.
Notes:
• When the ignition switch is turned OFF, the panel
and the center speaker are closed.
• When the ignition switch is turned ON, the panel and the
center speaker are open to secure their former positions.
Tiltl
Tilt 2
Tilts
Display Change
Press
[DISP]
to change the dispay.
When the power is on
(Example: CD Player mode)
When the power is off
Regula^Display
Dot Spectrum Analyzer Display
i
Clock Time Display
I
No Display
Clock Time Display
Note:
Displays differ from each source mode.
CQ-DRX900U
11