Softride 26321 Dura Assist 4 bike rack - Manual

(A) Main rack assembly
(B) Top plate
(C) Bike rack arms (2)
(D) Arm straps (12)
(E) Carriage bolts and lock washers (4 each)
(F) Hitch lock with keys
(G) Hitch bolt with lock washer (5/8” for 2” rack, ” for 1.25” rack)
(H) 1.25” Hitch Bar
PARTS INCLUDED
HYDRAULIC ASSIST
DURA BIKE RACK INSTRUCTIONS
Important This bike rack is designed for use in a 2” or 1.25” receiver and designed to hold a maximum of four bikes. Do not
use this rack for anything other than carrying bicycles. Do not exceed your vehicle’s receiver load ratings for any
reason. This rack cannot be used on Class 1 vehicle receivers. Reference the instruction manual for proper use of
this rack.
Warning Check the tightness of bolts and nuts periodically as they may loosen slightly during normal use.
DO NOT drive the vehicle with the bike rack in the lowered position.
This rack CANNOT be mounted and used on the rear of trailers.
This rack MUST be removed from the vehicle before going through a car wash.
13mm socket with extension
Adjustable wrench (2)
Screw driver
TOOLS REQUIRED
(A)
(B)
(C)
(G)
(F)
(E)
(H)
(D)
Model #26321