Softride Elite 4 bike rack - Manual

(A) Main rack assembly
(B) Top plate
(C) Bike rack arms
(D) Arm straps (12)
(E) Six – 8mm bolts and lock washers
(F) Hitch lock with two keys
(G) Hitch bolt with lock washer (5/8” for 2” rack, 1/2” for 1.25” rack)
For 1.25” racks only
(H) 1.25” hitch bar
(I) Fasteners for 1.25” hitch - three each 10mm bolts,
washers and lock nuts
PARTS INCLUDED
ELITE RACK INSTRUCTIONS
13mm socket with extension
Adjustable end wrench
Screw driver
TOOLS REQUIRED
Important This rack is designed for use with a 2” or 1.25” receiver hitch. The rack is designed to hold a maximum of four
bicycles. Do not use it for anything other than carrying bicycles. This rack is not recommended for use on the
back of a trailer.
Warning Check the tightness of bolts and nuts periodically as they may loosen during regular use, especially the hitch
receiver bolt if the rack is left attached to the vehicle for extended periods of time.
Warning Do not drive with the bike rack in the lowered position.
Warning Remove the rack from the vehicle when driving through automatic car washes.
(A)
(B)
(C)
(D)
(E)
(F)
(G)
(H)
(I)
1 1/4" HITCH COMPONENTS