STIEBEL ELTRON SBB 600 PLUS - Manual (Page 2)

2 | SBB S & SBB PLUS SOLAR STORAGE TANKS WWW.STIEBEL-ELTRON-USA.COM
1. CONTENTS
SECTION PAGE
1. Contents __________________________________________________________ 2
2. Safety Instructions _______________________________________________ 3
3. Operation and Service ___________________________________________ 4
3.1 Start-up __________________________________________________________________ 4
4. Maintenance and Cleaning ______________________________________ 4
4.1 Pressure Relief Valve ___________________________________________________ 4
4.2 Decalcifi cation ___________________________________________________________ 4
4.3 Sacrifi cial Anode – Inspection / Replacement _____________________ 4
5.
Failures – Cause – Correction ___________________________________ 5
6. Technical Specifi cations __________________________________________ 5
6.1 Technical Data & Specifi cations ______________________________________ 6
6.2 Dimensions ______________________________________________________________ 7
7. Installation Instructions - General ______________________________ 8
7.1 Set-up_____________________________________________________________________ 8
7.1.1
Brief Description of the Appliance - Applications ________________ 8
7.1.2 Connections ______________________________________________________________ 8
7.2 Delivery Confi guration _________________________________________________ 8
7.3 Tasks to be performed by Installer __________________________________ 8
7.4 Regulations and Standards ___________________________________________ 8
8. Set-up and Installation __________________________________________ 9
8.1 Set-up_____________________________________________________________________ 9
8.2 Connections
______________________________________________________________ 9
8.3 Heater Installation ______________________________________________________ 9
8.4 Hot Water Installation _________________________________________________ 9
8.4.1 Local Site Conditions ___________________________________________________ 9
8.4.2 Required Pipe Combinations _________________________________________ 9
8.4.3 Cold Water Supply Safety Components _____________________________ 9
8.4.4 Pressure Regulator Settings __________________________________________ 9
8.4.5 Before Filling ____________________________________________________________ 9
8.4.6 Drainage and Re-circulation _________________________________________ 9
8.5 Hot Water Temperature Probe ______________________________________12
8.6 Solar Storage Tank – Temperature Probe _________________________12
8.7 Connection to the Solar Unit ________________________________________12
8.8 Sacrifi cial Anode _______________________________________________________12
9.
Temperature & Pressure Relief Valve Assembly ______________ 13
10. Warranty _________________________________________________________ 15