Installation instructions for the professional – STIEBEL ELTRON SBB 600 PLUS User Manual
Page 8

8
| SBB S & SBB PLUS SOLAR STORAGE TANKS
WWW.STIEBEL-ELTRON-USA.COM
7.4 Regulations and Standards
WARNING: THIS PRODUCT MUST BE INSTALLED ACCORDING TO
ALL NATIONAL AND LOCAL PLUMBING AND ELECTRICAL CODES. IT
MUST BE INSTALLED BY A LICENSED PLUMBER AND ELECTRICIAN.
Refer to: all local construction, fi re-code and trade control
regulations.
7.1 General
Figure 1 is referenced for explanation of the following text.
7.1.1 Brief Description of the Appliance - Applications
The Stiebel Eltron Vertical Solar Storage tank SBB S / Plus, in
combination with Stiebel Eltron’s Solar Collector is an economical
hot water generator.
The Stiebel Eltron Vertical Solar Storage tank SBB S / Plus, in
combination with any hydronic boiler also functions as an effi cient
indirectly fi red water heater.
7.1.2 Connections
All connections (cold and hot) are readily accessible and allow for
easy installation.
7.2 Delivery Confi guration
The hot water storage tank SBB S / Plus is wrapped in plastic and is
delivered on a one-way pallet. The storage tank has foam insulation,
a ABS outer casing and ABS cover.
Equipment:
• Storage unit with two welded steel plain-ended pipe heat
exchangers
• Hot water corrosion protection with special enamel coating
• Maximum operation pressure
Hot water 150 PSI
Heated water 150 PSI
• Three immersion sleeves for housing of temperature probe and
thermometer
• Magnesium Safety Anode
• Circulation Socket
• Attached Flange inspection cover (SBB models)
• PU Foam insulation 2.95 in. (70 mm.) thick
• ABS outer casing with zipper in protective pouch
• ABS Cover and Flange cover
Only for SBB 600 Plus:
• Removable polyurethane-side panels with fastening strap and
locking parts
7.3 Tasks to be performed by Installer
An approved technician should perform the setup, installation and
initial start-up following these instructions.
1 Solar tank
2 PU side panel
3 Fastening strap
4 Locking part
7. INSTALLATION INSTRUCTIONS FOR THE PROFESSIONAL
Figure 3: SBB 600 Plus Solar Tank with insulation
3