STIEBEL ELTRON VERTICAL TILT RACK 45 - Manual (Page 6)

17 West St., W. Hatfi eld, MA 01088
| 800.582.8423 | 413.247.3380 | fax 413.247.3369 | [email protected] | www.stiebel-eltron-usa.com
Simply the Best
INSTALLATION INSTRUCTIONS
VERTICAL TILT RACKS - 45 SIDE-BY-SIDE ORIENTATION
order to keep the clips from rotating due to the torque of a
ratchet or wrench.
2.2 Mounting on a raised-seam roof
This section is to aid in the mounting of the rail assembly
onto a raised-seam roof using an S5U clip and L-102
L-Bracket.
Part: # of Collectors in Array:
1 2 3 4
# of Parts Required:
S5U clip 4 4 6 8
L-102 L-Bracket 4 4 6 8
1. Assemble the S5U clip and triangular racks using the
included fasteners.
2. Clip the S5U assembly to the roof ridges.
Note: For information regarding the installation of S5U clips
and L-Brackets, consult the Stiebel Eltron Raised-seam
Roof Installation Guide.
3. Follow the same procedures for the remaining assembly
as shown in steps 3-14 in Section 2.1.
For any service or warranty related issue, contact
Stiebel Eltron at:
800.582.8423
17 West Street
West Hatfi eld, MA 01088
TOLL FREE
800.582.8423
PHONE
413.247.3380
FAX
413.247.3369
info @ stiebel-eltron-usa.com
www.stiebel-eltron-usa.com
Printed on recycled chlorine-free paper with soy-based inks.
Due to our continuous process of engineering and technological
advancement, specifi cations may change without notice.