STIEBEL ELTRON SOL 27 PREMIUM W - Manual (Page 15)

17 West St., W. Hatfi eld, MA 01088
| 800.582.8423 | 413.247.3380 | fax 413.247.3369 | [email protected] | www.stiebel-eltron-usa.com
Simply the Best
INSTALLATION INSTRUCTIONS
SOL 27 PREMIUM S & W COLLECTORS - 230016 & 230017
to the weather must also be checked periodically for their
condition. Look for signs of abrasion, wear, corrosion,
contamination, or damage. Check the pH value (> 7) and
frost protection level (< -20°F) of the heat transfer medium
annually.
8 Warranty
Stiebel eltron warrants to the original owner that the sol 27
premium - fl at plate solar collector will be free from defects
in workmanship and materials for a period of ten (10) years
from the date of purchase.
Should the part(s) prove to be defective under normal use
during this period, stiebel eltron, inc. Will be responsible for
replacement of the defective part(s) only. Stiebel eltron, inc.
Will not be liable for any costs of transportation, removal,
reinstallation, or any other labor or freight charges that may
arise in connection with a warranty claim or any incidental
or consequential expenses.
This warranty does not apply:
1. To conditions resulting from a failed component or
part that is not part of the solar collector or absorber
plate.
2. To freeze damage.
3. To conditions resulting from misuse, abuse,
neglect, accident, or alteration.
4. To minor discoloration of the collector framewall
or absorber plate.
5. To glass breakage.
6. To conditions resulting from the introduction of
harmful chemicals, caustic fl uids, or liquids deleterious
to copper tubing, including improperly applied or
maintained heat transfer fl uids.
7.
To propylene glycol ph levels above 10 or below 8.
8. To periods of stagnation in excess of 60 days.
9. To excessive pressure.
10. To clouding or similar occurrence resulting from
the normal intrusion of moisture into.
11. To conditions resulting from fl oods, earthquakes,
winds, fi re, lightning, or circumstances beyond the
manufacturer‘s control.
12. To installation methods which do not conform to
relevant national, state or local.
Codes and ordinances, good industry practices or
applicable manuals, diagrams, technical bulletins or
written installation instructions; and, to applications other
than medium temperature.
To obtain service under this warranty, the owner must fi rst
secure written authorization from stiebel eltron, inc. The
owner shall be required to show proof of purchase date, and
to pay all transportation costs to return the defective part(s)
for repair or replacement.
For any service or warranty related issue, contact
Stiebel Eltron at:
800.582.8423
17 West Street
West Hatfi eld, MA 01088
TOLL FREE
800.582.8423
PHONE
413.247.3380
FAX
413.247.3369
info @ stiebel-eltron-usa.com
www.stiebel-eltron-usa.com
Printed on recycled chlorine-free paper with soy-based inks.
Due to our continuous process of engineering and technological
advancement, specifi cations may change without notice.