Operating instructions, For the user – STIEBEL ELTRON GALAXYTM Series Automatic Hand Dryer User Manual

Page 2

Advertising
background image

LIMITED WARRANTY

STIEBEL ELTRON, Inc. warrants to the original owner that the GALAXY

TM

hand dryer will be free from

defects in workmanship and materials for a period of FIVE YEARS from the date of purchase. Should

any part(s) prove to be defective under normal use during this period, STIEBEL ELTRON, Inc. will be

responsible for replacement of the defective part(s) only. Damage to the housing due to abuse is not

covered by this warranty. STIEBEL ELTRON, Inc. is not responsible for labor charges to remove and/or

replace the defective part(s), or any incidental or consequential expenses. Should the owner wish to

return the entire unit for repair, the owner must first secure written authorization from STIEBEL ELTRON, Inc.

The owner shall be required to show proof of purchase date by including a copy of the original

invoice, and to pay all transportation costs to return defective part(s) or hand dryer for repair or

replacement.

IF YOU NEED TO RETURN A PART OR A HAND DRYER UNDER WARRANTY, PLEASE CALL US FIRST TO

OBTAIN SHIPPING INSTRUCTIONS. REMEMBER TO SEND A COPY OF THE INVOICE WITH YOUR RETURNED

PART.

STIEBEL ELTRON, Inc.

17 West Street

West Hatfield, MA 01088

Phone: 800-582-8423

Operating Instructions

for the user

In order to dry your hands most efficiently, please use the

following procedure:

• shake off excess water over the wash basin

• place hands underneath the unit at a distance of 4" - 7"

• rub your hands together as if you were washing them

Your hands will be dry within 25 - 35 seconds.

The STIEBEL ELTRON GALAXY

TM

series hand dryers are equipped

with an infrared sensor switch. This sensor will activate the unit

when hands are placed underneath it. Approximately 7

seconds after the hands have been removed, the unit will

automatically shut off.

The sensor is the black rectangle located underneath the unit

between the air exit and air inlet grills. The sensor switch will not

work properly if it has been covered by gum or dirt. If the sensor

is obstructed, the hand dryer will switch off automatically to

prevent it from running continuously. Should the unit overheat,

a safety high-limit switch will turn off the heating element. The

safety high-limit switch resets automatically once the heating

element has had a chance to cool down.

Normal Care

To clean the case use a soft cloth with a mild detergent if

necessary. Never use any abrasive cleaners since they will

scratch the finish of the unit. Never spray water or cleaning

fluids directly on hand dryer. While cleaning the unit, make sure

the electric eye switch is not covered. THE GALAXY

TM

HAND

DRYER DOES NOT CONTAIN ANY PARTS SERVICEABLE BY THE LAY

PERSON. IN CASE OF MALFUNTION PLEASE CONTACT A LICENSED

ELECTRICIAN.

48

"120

cm

min. 4"

10 cm

FIG. 1

Advertising