Windy Nation Windtura 750 Wind Turbine Generator - Manual (Page 6)

6
Installation Warnings
Do not assemble or install the Windtura 750 until you have read the entirety of this owner’s
manual!
1. It is necessary to follow the installation instructions and safety precautions included in this
owner’s manual. Failure to do so can result in serious accidents including but not limited to
property damage, serious injury, and death. Additionally, keep this owner’s manual after you
install your Windtura 750 Wind Turbine as it includes maintenance information.
2. Before assembling the Windtura 750 inspect all parts for any defects. If you have any questions
or concerns, contact WindyNation Inc. or your local distributor before proceeding with
installing your Windtura 750.
3. Never install a wind turbine on a windy day.
4. Use proper electrical wiring and grounding techniques which are in compliance with your
country’s electrical codes.
5. Tower design and construction should be approved by a professional engineer and also follow
all local and national laws in your respective area.
6. Do not install the Windtura 750 in any location where anyone or anything can come in contact
with it. The Windtura 750 has moving parts, including high rpm blades, which can cause serious
injury or death. Use common sense when choosing a location to mount the Windtura 750.
Technical Specifications:
Model Windtura 750
Rotor Diameter 79 in (200.7 cm)
Net Weight 56 lbs (23.6 kg)
Survival Wind Speed 105 mph (47 m/s or 169 kph)
Initial Power Generator Wind Speed 6-8 mph (2.7-3.6 m/s)
Rated Power 800 Watts at 29 mph wind speed
Battery Bank Specifications Suitable for 12 and 24 volt battery banks
Recommended Fuse for 12 volt system
Recommended Fuse 24 volt system 60 amp slow blow
60 amp slow blow