MagnaFlow CHEVROLET SS Stainless Cat-Back System PERFORMANCE EXHAUST - Manual (Page 3)

MAGNAFLOW: 22961 Arroyo Vista - Rancho Santa Margarita, CA 92688 | 1(800) 990-0905
Technical Support: 1(800) 959-9226 | Email: [email protected]
Step 5. Once a final position has been chosen for
the new exhaust system, evenly tighten all clamps
from front to rear using the torque specifications on
page one of the instructions. Inspect all fasteners
after 25-50 miles of operation and re-tighten if
necessary.
Step 4. Working front to rear insert all the
remaining hangers into rubber insulators. Do not
forget to re-install the tunnel brace using the OEM
fasteners.