Casablanca Fan Company Stealth 3243Z User Manual
Page 9
9
®
3
Figure #5
aLMOND
BEZEL
BEZEL
TABS
BEZEL
aLIGNMeNT
PIN AND HOLE
Figure #3
aLMOND
BEZEL
RUBBER KEY
PAD
W-85 Wall Control Bezel replacement: -
CONTINUED
Step 17c. Reinstall the rubber key pad on to the
four (4) locating pins located on the almond bezel
as shown in Figure #3 and #4.
Step 17d. To attach the bezel back on to the front
of the switch you will need to align the four (4) tabs
on the bezel with the front of the wall control and
by gently pressing on both top and button of the
bezel at the same time, snap the bezel back on to
the front of the switch as shown in figure #5.
Step 17e. Check your work by pressing on the
light, fan, reverse and power buttons, making sure
that the buttons do not stick and that each switch
functions properly.
RUBBER KEY
PAD
aLMOND
BEZEL
Figure #4
LOCaTING
PINS
(4)