MagnaFlow JEEP TRUCK GRAND CHEROKEE Stainless Cat-Back System PERFORMANCE EXHAUST User Manual

Page 2

Advertising
background image

MAGNAFLOW: 22961 Arroyo Vista - Rancho Santa Margarita, CA 92688 | 1(800) 990-0905

Technical Support: 1(800) 959-9226 | Email: [email protected]

Step 1.

Begin removing the OEM exhaust system by

unbolting the two flanges in front of the main muffler.
Working front to rear remove all welded hangers from the
rubber insulators. The OEM exhaust system can now be
removed in one piece. Retain all mounting hardware and
rubber insulators as they will be needing to mount your
new MAGNAFLOW system.

Step 2.

Begin installing your new system by first loosely

attaching both Resonator Assemblies to the vehicle outlet
flanges using the four supplied M10 bolts.

Step 3.

Loosely install the Y-Pipe Assembly to the two

Resonator Assemblies using two of the suppled 2.50"
clamps.

Step 4.

Install the Muffler Tail Pipe Assembly in a similar

fashion using the remaining 2.50" clamp. Locate all
welded hangers to the rubber insulators.

Advertising