MagnaFlow DODGE DIESEL CUMMINS, 5in. HIGH-OUTPUT Aluminized Pro Series Diesel PERFORMANCE EXHAUST - Manual (Page 2)

Step 3: With all components mounted loosely,
adjust the system for overall aesthetics and
clearance of frame and bodywork.
(MAGNAFLOW recommends at least 1/2" of
clearance between the exhaust system and any
body panels to prevent heat-related body
damage or fire.)
Step 4: Once a final position has been chosen
for the new system, evenly tighten all fasteners
from front to rear. The supplied band clamps
must be VERY tight to properly align the pipes
and prevent leaks (Approximately 40ft-lbs.)
Inspect all fasteners after 25-50 miles of
operation and retighten if necessary.
Mufflers, Converters,
Systems and Tips
INSTALLATION INSTRUCTIONS
18989
2004 - Dodge Ram HO Diesel 5.9L
Warning: When working on, under, or around
any vehicle exercise caution. Please allow the
vehicle's exhaust system to cool before removal,
as exhaust system temperatures may cause
severe burns. If working without a lift, always
consult vehicle manual for correct lifting
specifications. Always wear safety glasses and
ensure a safe work area. Serious injury or death
could occur if safety measures are not followed.
** Magnaflow Performance Exhaust recommends professional
installation on all their products
Magnaflow Performance Exhaust - 22961 Arroyo Vista Rancho Santa Margarita, CA 92688
Main #: 1-800-990-0905 Technical Support: 1-800-959-9226 ext 4500 Nov 19, 2012
Rev: 000