MagnaFlow DODGE DIESEL CUMMINS, 4in. SYSTEM Aluminized Pro Series Diesel PERFORMANCE EXHAUST - Manual (Page 2)

Step 3: With all components mounted
loosely, adjust the system for overall
aesthetics and clearance of frame and
bodywork. (MAGNAFLOW recommends at
least 1/2" of clearance between the exhaust
system and any body panels to prevent
heat-related body damage or fire.)
Step 4: Once a final position has been
chosen for the new system, evenly tighten all
fasteners from front to rear. The supplied
band clamps must be VERY tight to properly
align the pipes and prevent leaks
(Approximately 40ft-lbs.) Inspect all fasteners
after 25-50 miles of operation and retighten if
necessary.
Mufflers, Converters,
Systems and Tips
INSTALLATION INSTRUCTIONS
18998
2007 Dodge Diesel 6.7L
Warning: When working on, under, or around
any vehicle exercise caution. Please allow the
vehicle's exhaust system to cool before removal,
as exhaust system temperatures may cause
severe burns. If working without a lift, always
consult vehicle manual for correct lifting
specifications. Always wear safety glasses and
ensure a safe work area. Serious injury or death
could occur if safety measures are not followed.
** Magnaflow Performance Exhaust recommends professional
installation on all their products
Magnaflow Performance Exhaust - 22961 Arroyo Vista Rancho Santa Margarita, CA 92688
Main #: 1-800-990-0905 Technical Support: 1-800-959-9226 ext 4500
Nov 14, 2012
Rev: 000