Radio status information – AvaLAN Wireless AW900FS User Manual

Page 18

Advertising
background image

AW900FS

User’s Manual

PAGE 18

Technical Support (650) 384-0000

www.avalanwireless.com

Radio Status Information

The Login or Admin pages of the radio’s built-in web browser interface provide many useful pieces of

information that let you know how well the wireless link is working:

Top of Web Page

Version

Current version of the radio’s Ethernet interface.

MAC Address

Radio’s hardware MAC Address.

Ethernet

Status of Ethernet connection: 10 Mbps or 100 Mbps, full or half du-

plex, connected or disconnected.

Uptime

Total time radio has been active since last power cycle or hardware

reset.

Device Information

Device Type

Access Point (master) or Subscriber Unit (client)

# of Subscriber Units

For Access Point only, up to 4 permitted.

Subscriber ID

For Subscriber Unit only, the ID selected for this radio.

Current TX Power

The output power from 0dBm to 30dBm

RF Status

Connected or Searching

Product

900fs

Radio Firmware Version

32

Radio Firmware Build

519

Radio Address

XX.XX.XX (ex. 00.17.5d)

Statistics

Radio RSSI

Received Signal Strength Indicator. The radios operate best with this

value between -30 and -95 dBm

Radio Total Packets

# of Ethernet packets received since last reset.

Radio Failed Packets

# of packets unsuccessfully transmitted.

Radio Passed Packets

# of packets successfully transmitted.

Radio Broadcast Packets

Traffic simultaneously addressed to all devices on the network.

Radio Unicast Packets

Traffic sent to a single destination.

Radio Average TX Size

Average bytes per packet transmitted.

Radio Average RX Size

Average bytes per packet received.

Advertising