AvaLAN Wireless AW900FS User Manual
Page 8
AW900FS
User’s Manual
PAGE 8
Technical Support (650) 384-0000
www.avalanwireless.com
regardless of their subnet.
Step 5: Bench Testing
Power up the units on the bench before deploying in the field. It is important to keep the radios
at least 20 feet apart using the 2dBi omni antennae and Transmit power set to 10dBm to prevent
over driving of radio’s receiver (permanent damage can occur).
•
Power on all the radios with the computer wired directly to the AP.
•
Open a web browser to the IP addresses assigned in the prior steps to view the operation of
all the radios.
•
Perform PING testing to simulate network data and observe overall performance.
INSTALLATION:
Every installations is different, however radio performance is typically best at shorter distances
using directional antennae with unobstructed paths in low noise environments. It can be challenging
to determine the best approach for a unique installation. The radio’s browser interface has a link
performance statistics that is helpful for troubleshooting radio interference noise levels.
Please call AvaLAN Technical Support for assistance as needed.