Electrical connections, User’s manual, Aw900r2-eval – AvaLAN Wireless AW900R2-EVAL User Manual

Page 4

Advertising
background image

User’s Manual

PAGE 4

Technical support (650) 384-0000

www.avalanwireless.com

AW900R2-EVAL

Electrical Connections

The AW900R2-EVAL 900 MHz Wireless RS-232 Module Evaluation Kit contains two

each of the following items:

• AW900R2 Wireless Ethernet Modules

• AW2-900 Omnidirectional Antennas

• AW-P8 Antenna to Radio Connectors

• 20” USB to Mini-USB Adapter Cables

• 120VAC to 6 VDC Wall Hanger Power Supplies

Additional quantities of any of these components may be purchased from AvaLAN

Wireless or our distributors.
To power up a radio module, make connections to it as shown in this diagram:

Provide some physical separation between two radio module antennas — at least

ten feet. If their antennas are in close proximity, the module radio receivers will be

overloaded, causing degradation in the bit error rate and slower link performance.

900 MHz

Antenna

RS-232

Data

Source

White-striped wire

Plain black wire

Transmit

Receive

Ground

PC with

Windows XP

or later

USB

Note:
The USB connection is not needed after the link is

configured and operating normally. If the USB cable

is connected, the module can draw its power from

it. (A high-power USB port is required.)

Status LEDs

Reset Switch

(cycles power)

Advertising