Aviom A320 - Manual (Page 42)

33 A320 P
ersonAl
M
ixer
U
ser
G
Uide
Recall Mix Button
The r
eCAll
M
Ix
button has two functions on the A320. When pressed and released, it activates the Recall
Mix function. When held, the Save function is activated.
To Recall a Mix Preset
To recall a Mix Preset that has been stored in one of the A320 Personal Mixer’s mix locations (the channel
buttons 1-8):
1. Press and then release the r
eCAll
M
Ix
button; its yellow LED will blink.
2. Press the channel button 1-8 that corresponds to the mix you wish to recall (buttons 9-16
are ignored).
3. The mix is recalled and the yellow LED next to the r
eCAll
M
Ix
button goes out.
4. To cancel a mix recall, press the r
eCAll
M
Ix
button again instead of a channel button 1-8.
Clear a Mix
The current mix can be cleared and reset by pressing and releasing the r
eCAll
M
Ix
button and then pressing
the M
ute
button, returning all channel settings to their default values. Resetting a mix does not erase the
mix parameters stored in memory for any of the eight Mix Preset locations. To overwrite a Mix Preset after
performing a reset, use the Save procedures described previously.
This command resets the following:
• Channel volumes are set to zero
• All channels are unmuted
• Stereo Placement (Pan) for all mono channels is set to center
• Stereo Placement for all stereo channels is set to full left/right
• Channel Button 1 is selected
The Master Volume and Master Tone settings are not affected by this command.
Press r
eCAll
M
Ix
and then press M
ute
to clear the current mix.