Rear panel features, Stereo mix out, A-net in – Aviom A320 User Manual
Page 44: Rear panel features stereo mix out a-net in

35
A320 P
ersonAl
M
ixer
U
ser
G
Uide
Rear Panel Features
This section details the function of each of the rear panel features on the A320 Personal Mixer.
Stereo Mix Out
A 1/4-inch TRS Stereo Mix Out jack is provided for direct connections to earbuds and headphones. The
TRS output may also be used as a line-level output when connecting the Stereo Mix Out to a wireless
in-ear transmitter or a set of powered stereo speakers. A TRS to dual TS splitter cable is required for
this application (sometimes referred to as an insert cable or Y-cable). A splitter cable provides separate
unbalanced left and right signals to the inputs of the receiving device.
P
N
ote
:
Do not connect the TRS output from the Stereo Mix Out jack to a balanced mono input.
A balanced audio input is differential—it subtracts the positive signal from the negative
signal to remove any noise and interference picked up in the cable. The TRS Stereo Mix Out
is not a balanced signal.
A-Net In
The Cat-5 A-Net In port is fitted with a standard RJ45 jack, and accepts either Pro16 or Pro16e A-Net data.
The A320 also receives DC power over the same Cat-5e data cable. An external DC power supply is not
required.
P
N
ote
:
When the A320 is connected to an A-Net Distributor, the type of A-Net received (Pro16 or
Pro16e) is dependent on the input device that is supplying A-Net to the distributor. Both
data types are compatible with the A-Net Distributors.
See “Setting the Mixer Mode” on page 26 for information on setting the A320 to 16-channel or
32-channel operation.