Db25 wiring info, An-16/o db25 audio connections, Db25 pinout – Aviom AN-16/o User Manual
Page 42: An‑16/o db25 audio connections db25 pinout
34
AN-16/
o
o
utput
M
odule
u
ser
G
uide
DB25 Wiring Info
The rear panel of the AN‑16/o uses a pair DB25 connectors for its balanced
line‑level audio outputs.
AN-16/o DB25 Audio Connections
The DB25 multi‑pin connectors on the AN‑16/o are wired to analog pinout
standards. This allows easy interfacing with a variety of audio equipment
with the use of readily‑available multipin breakout cables or patch bays.
Each DB25 jack carries eight balanced audio channel outputs.
To wire a custom cable for use with the AN‑16/o DB25 output jacks, use the
following table:
Cable Number
DB25 Pin Number
Hot
Cold
Ground
1
24
12
25
2
10
23
11
3
21
9
22
4
7
20
8
5
18
6
19
6
4
17
5
7
15
3
16
8
1
14
2
No Connect
13
DB25 Pinout
The pins on the panel‑mounted DB25 jacks on the AN‑16/o are numbered
according to the following diagram.
13 12 11 10 9 8 7 6 5 4 3 2 1
25 24 23 22 21 20 19 18 17 16 15 14
Each DB25 jack carries eight of the balanced line‑level audio signals—
channels 1‑8 or channels 9‑16.