Aviom AN-16/o - Manual (Page 45)

Specifications
Audio Outputs 16 channels, balanced
DB25 multipin connectors (2), analog pinout
Impedance balanced outputs for the Mic, +4dBu,
and +18dBu settings;
Differential output for the +24dBu output
D/A Conversion 48kHz, 24‑bit
Operating Levels 4‑position switch, per channel pair
+24, +18, and +4dBu line‑level, or mic‑level
Max. Output Level +24dBu
Metering LEDs; green: Signal Present; red: Clip; per channel
Output Impedance 226 ohms (+18dBu, +24dBu);
100 ohms (+4dBu, Mic)
Freq. Response 4Hz‑22kHz +0.2dB/‑3dB
THD +N < 0.004%
Crosstalk ‑90dB
Signal to Noise
(unweighted)
92dB typical, A/D to D/A
Measured from AN‑16/i Input Module to AN‑16/o
v.4 Output Module
Bit Error Rate (BER) 10 ‑
12
Digital Connections A‑Net In: 1; A‑Net Out: 1; A‑Net Expansion: 1;
Neutrik EtherCon connectors
A-Net A‑Net Expansion allows 32 channels of audio to
be transmitted over one Cat‑5e cable when using
two input modules and two output modules
Uses unshielded Cat‑5e UTP (or better) cable
Latency 0.620 msec (measured from analog input to
analog output)
Power Supply
Input Voltage
Output Voltage
Plug Size
External, DC, universal switching type
100‑240 volts, 50/60Hz, 30VA
24 VDC, 0.5 amp
2 mm
Dimensions 19” (482.6 mm) wide x 5.75” (146 mm) deep;
1U high
Weight 6.8 lb. (3.08 kg)
Options AN‑16SBR System Bridge; used to combine up
to four A‑Net streams for transmission over one
Cat‑5e cable
All Aviom products are designed and manufactured in the USA.
37 AN-16/
o
o
utput
M
odule
u
ser
G
uide