Brookfield DV-II+ Programmable Viscometer - Manual (Page 9)

Brookfield Engineering Labs., Inc. Page 9 Manual No. M/97-164-F1 102
I.7 Cleaning
Be sure to remove the spindle from the instrument prior to cleaning. Severe instru-
ment damage may result if the spindle is cleaned in place.
Instrument and Keypad: Clean with a dry, non-abrasive cloth. Do not use solvents
or cleaners.
Immersed Components (spindles): Spindles are made of stainless steel. Clean with a non-
abrasive cloth and solvent appropriate for sample mate-
rial.
Note: When cleaning, take care not to apply excessive force - it may bend the spindles.