Brookfield DV-III Rheometer - Manual (Page 18)

Brookfield Engineering Laboratories, Inc. Page 18 Manual No. M/98-211-A0701
Figure 18
Figure 19
The DV-III+ may be set to stand alone mode by turning it OFF and ON again and selecting "Stand
Alone" or by removing the DVP-80 cable prior to turning the DV-III+ on.
Note: The DV-III+ cannot communicate with RHEOLOADER software in the external
control mode. Chose "Stand Alone" when presented with Figure 18 if you want
to use RHEOLOADER.