BUCHI Melting Point M-565 - Manual (Page 11)

5 Putting into operation
11 MeltingPoint Monitor 1.1 Operation Manual, Version B
Windows InstallShield Wizard
Special information for Windows 7 users
If the ‘User Account Control’ is activated, the message “Do you want to allow the following program to
make changes to this comupter” appears at the beginning of the installation procedure. Click ‘Yes’ to
acknowledge.
5.5 Registration
Software in demo mode
When you start the software for the first time, the ‘Buchi Software Evaluation Information’ window will
start. Click ‘OK’ to start the MeltingPoint Monitor software in demo–mode. This mode is limited to 60
days only! After the trial period has expired, the MeltingPoint Monitor software can not be started. In
this case, you will have to order a licensed version of the program.
Licensed software
For activation, it is necessary to register the software. To do so, select Help > Software Registration
in the MeltingPoint Monitor program. This will bring up the registration form. Follow the instructions,
displayed in the form (see next figure).
�