BUCHI ELS Detector C-650 - Manual (Page 18)

C-650 Operation Manual, Version B 5 Putting into operation 18
5 Putting into operation
This chapter describes how the device is installed and gives instructions on initial startup.
NOTE
Inspect the device for damages during unpacking. If necessary, prepare a status report immedi-
ately to inform the postal company, railway company or transportation company.
Keep the original packaging for future transportation.
5.1 Installation site
Put the device on a stable, horizontal surface. Consider the maximum product dimensions and
weight. Obtain the environmental conditions as described in section 3.2 Technical data overview.
Installation prerequisites:
• Make sure, the device is not subject to drafts or significant temperature changes.
• Do not place it near air conditioning vents, windows, ovens, etc.
• Make sure that access to the power supply to disconnect the device must be kept at any
time.
• Make sure to leave a distance of at least 20 cm between the device and another object or
wall.
• Place the detector close to the outlet of the column to minimize extra column band broaden-
ing which would reduce the resolution of the choromatographic separation.
•
WARNING
Death or serious injuries by use in explosive environments.
• Do not operate the device in explosive environments
• Do not operate the device with explosive gas mixtures
• Before operation, check all gas connections for correct installation
• Directly withdraw released gases and gaseous substances by sufficient ventilation
CAUTION
Risk of minor or moderate injury by heavy weight of the device.
• Consult a second person to lift the device
• Do not drop the device
• Place the device on a stable, even and vibration-free surface
• Keep limbs out of crushing zone
• To transport the device, place your hands under the device
NOTICE
Risk of device damage by liquids or mechanical shocks.
• Do not spill liquids over the device or its components
• Do not move the device when it is loaded with sample liquid
• Keep external vibrations away from the device
• Safely attach the device to the bench in earthquake prone regions
NOTE
As a destructive detector, the C-650 should be the last one in the flow path or can be used with
a splitter.