Checkline PT-RTR - Manual (Page 15)

12
During measurement, if the linearized measurement falls outside
of the selected tape grade's range, the Gage will suggest a more
suitable tape grade to perform the measurement.
Reset
Reset (soft reset) restores factory settings and returns the Gage to
a known condition. The following occurs:
- All batches, stored measurements, images, batch names and
screen captures are erased.
- Menu settings are returned to the following:
Memory = OFF
Statistics = OFF
Memory Display = None Bluetooth = OFF
WiFi = OFF
Perform a more thorough Hard Reset by powering down the
Gage, waiting several seconds, then simultaneously holding both
the center and (+) buttons until the Reset symbol
appears. This returns the Gage to a known, “out-of-the-box”
condition. It performs the same function as a menu Reset with the
addition of:
Date, Time and WiFi are not affected by either Reset.
Units = microns
Flip Display = Normal
White on Black = OFF
Language = English Battery Type = Alkaline
Backlight = Normal
USB Drive= ON
Auto Sync = OFF
- Bluetooth Pairing info is cleared.
- Menu settings are returned to the following:
Setup Menu Setup Menu
Tape Grade = XC
Linearize = ON
NOTE:
Gage Info
Displays the model number & serial number, probe type & serial
number, PosiSoft.net registration key, the amount of remaining
memory for storage of readings, date and time and software
packages.
For security purposes, the registration key is required to add the
Gage to your PosiSoft.net account.