Ir speed dome operating manual, Auto scan, Scan no – COP-USA CD55NV-IR35YK User Manual
Page 40
IR Speed Dome Operating Manual
39
•AUTO SCAN
The dome supports 8 groups of auto scan. Please check
the following steps to set up a scan.
1)
SCAN NO.:
Move the cursor here and press IRIS OPEN to enter the
setup of SCAN Number. Move the joystick to select a preset number
(1-8) and press IRIS OPEN to confirm.
2)
TITLE:
Move the cursor here and press IRIS OPEN to enter the
setup of SCAN Title. Check the detailed above in DOME TITLE
settings.
3)
<LEFT LIMIT>:
Move the cursor here and press IRIS OPEN to
enter. Move the dome to a defined position as left limit and press
IRIS OPEN to save this left boundary.
4)
<RIGHT LIMIT>:
Move the cursor here and press IRIS OPEN to
enter. Move the dome to a defined position as right limit and press
IRIS OPEN to save this right boundary.
5)
START:
Move the cursor here and press IRIS OPEN to start the
current scan.
6)
SCAN SPEED:
Move the cursor here and press IRIS OPEN to set up
the scan speed ranging 1-30.
MAIN MENU
LANGUAGE :ENGLISH
<SYSTEM INFORMATION>
<DISPLAY SETUP>
<DOME SETTINGS>
<CAMERA>
<MOTION>
RESTART
FACTORY DEFUALTS
HELP
EXIT
MOTION
<PRESET>
<SCAN>
<SEQUENCE>
<PATTERN>
<ZONES>
<TIMING ACTION>
<MOTION DETECT>
<AUTO TRACKING>
BACK
EXIT
SCAN
SCAN NO. :1
TITLE :SCAN 1
START
<LEFT LIMIT>
<RIGHT LIMIT>
SCAN SPEED :20
BACK
EXIT