Ir speed dome operating manual, Zones – COP-USA CD55NV-IR35YK User Manual
Page 43
IR Speed Dome Operating Manual
42
•ZONES
The use can set up zone title when the camera moves to a
defined location, which will make it much easier for the user to
identify the location. The dome supports 8 zone titles. Please
check the following steps to set up a zone
1)
ZONE NO.:
Move the cursor here and press IRIS OPEN to enter the
setup of Zone Number. Move the joystick to select a zone number
(1-8) and press IRIS OPEN to confirm.
2)
TITLE:
Move the cursor here and press IRIS OPEN to enter the
setup of Zone Title. Check the detailed above in DOME TITLE
settings.
3)
<LEFT LIMIT>:
Move the cursor here and press IRIS OPEN to
enter. Move the dome to a defined position as left limit and press
IRIS OPEN to save this left boundary.
4)
<RIGHT LIMIT>:
Move the cursor here and press IRIS OPEN to
enter. Move the dome to a defined position as right limit and press
IRIS OPEN to save this right boundary.
5)
DELETE:
Move the cursor here and press IRIS OPEN to delete the
current zone.
MOTION
<PRESET>
<SCAN>
<SEQUENCE>
<PATTERN>
<ZONES>
<TIMING ACTION>
<MOTION DETECT>
<AUTO TRACKING>
BACK
EXIT
ZONES
--ZONE IS NOT SET--
ZONE NO. :1
TITLE :ZONE 1
<LEFT LIMIT>
<RIGHT LIMIT>
DELETE
BACK
EXIT
MAIN MENU
LANGUAGE :ENGLISH
<SYSTEM INFORMATION>
<DISPLAY SETUP>
<DOME SETTINGS>
<CAMERA>
<MOTION>
RESTART
FACTORY DEFAULTS
HELP
EXIT